Have you been annoyed by your toilet’s weak flush, or are you looking for the best high power flush toilet for your house? If you frequently have clogged drains or must flush twice to finish everything, a high-pressure toilet may be the solution. You can learn more about the advantages of a high-pressure toilet and whether you should buy one in this article.
There are four types of high power flush toilet.
There are four kinds of high-power flush toilets created for the household market. They all have one factor: greater flush strength than the standard gravity-assisted toilet. Here are the toilets you can choose from:
Toilets that use compressed air to give your flush a boost without using more water are called pressure-assisted toilets. They tend to be a little noisy and pricey.
- Double Cyclone and Tornado Flush
The two toilets created by Toto use pressurized lateral jets at the top of the bowl to create a vortex flush that pushes the excrement down and cleans the bowl. Five nozzles on the Tornado flush create a powerful vortex flush to push waste down and clean the toilet bowl. Two nozzles on the Double Cyclone flush push waste down and clean the toilet bowl.
- Siphon Jet
Siphon Jet. What is a siphon jet flush toilet? You can install a separate small reservoir tank alongside other systems. Water is discharged with a vacuum pull to increase the power of your flush.
- Double Vortex
The Double Vortex toilet from American Standard uses dual nozzles at the top of the bowl and the drain to produce a more substantial flush. Water flows from both nozzles towards the drain and away simultaneously, generating a solid flow.
You can boost your toilet’s flush performance by following these steps.
Maintaining a high flush rate with your current toilet may be difficult if you have a low-flow toilet. However, you may be able to enhance your flush rate by maintaining what you already have. Here are some tips:
- Before replacing your toilet, check for clogs in your pipes to see if your low flow is simply because of clogs. Ensure to check your toilet drain for clogs as well.
- Adjusting the float valve, ensure your toilet tank has enough water to flush correctly. In case the water level is low, you might not have enough water to flush your toilet correctly. Position the float valve between the minimum and maximum marks on the tank.
- Clean the rim jets by scraping off the mineral buildup with a thin wire if they become clogged over time. An unbendable wire coat hanger is an easy do-it-yourself tool.
- A toilet tank soak using vinegar and baking soda can help your toilet function properly. Find the rubber tubing over the overflow valve on your toilet tank and keep it intact while you pour in a quart of white vinegar. Pour the vinegar into the tube and let it sit for about 15 minutes. Then, sprinkle small amounts of baking soda until you hear it sizzling. Do not flush for two hours after the vinegar has been added, then flush it again to see if the flow has improved.
- A faulty flush valve can hamper flushing. Look for a flush valve at the base of your toilet tank. It’s the piece that lifts when you flush to release water, so jiggle the handle if you can’t locate it. A damaged or cracked flush valve may reduce flushing power.
To verify whether your flush valve is working correctly, put a few drops of food coloring in your toilet tank. If the colored water in the toilet bowl is not sealed correctly, you must replace your flush valve. If all else fails and you still do not have enough power, it is time to get a new toilet. If you have a high-power toilet that you wish to have installed, we can help.
Converting a Low-Flow Toilet to High-Flow
It’s regrettable, but you cannot convert a low-flow toilet to a high-flow or pressure-assisted toilet. You must replace a gravity-flush toilet with a pressure-assisted flush toilet.
Choosing a low-flow toilet might be beneficial to you.
The toilet you choose, low-flush or high-efficiency, should provide everything down with only one flush. A low-flush toilet can save water (provided you don’t flush twice). There are a lot of water-saving toilets that don’t leave everything half-flushed. Using less water while still getting everything down is a great way. Dual-flush toilets offer a “half flush” option for liquid waste and a “full flush” for solids. If you don’t have any issues with a gravity-assisted model, stick with that.
Read Next: Tankless Water Heater; Making The Switch
A More Powerful Flush Upgrade
A more powerful flush pushes waste further and faster, resulting in fewer or no clogs. Keeping sewer lines and septic tanks healthier also reduces the chance of backups.
If you are in the Asheville, NC area and need a professional plumber, CONTACT Autry Plumbing TODAY!